Strategic Products – SMC United Arab Emirates

Ionizer Series IZS40/41/42

smcmin — Fri, 10 Jan 2014 03:23:08 +0000

FeaturesOther FeaturesApplication ExamplesModels and Functions

Dual AC type Series IZS42 (Potential amplitude reduction specification)

Potential amplitude: 25 V or less 80% reduction compared to the conventional model
(Compared to the IZS31 series at the installation height of 300 mm)
Potential amplitude is reduced with SMC independent Dual AC type sensor. Static electricity elimination may be achieved without causing damage to a device which is sensitive to electrostatic discharge (ESD). Potential amplitude applied to the applicable workpiece is reduced even if it the workpiece is mounted within close proximity of the ionizer.
Independent Dual AC type is implemented.
Dual AC type/IZS42

Eliminating static electricity on a glass substrate
Prevents the breakage of glass substrates due to the static electricity which is generated when the substrate is lifted from the surface plate.

Eliminating static electricity on an electric substrate
Prevents the breakage of electric substrates due to the static electricity which is generated when the substrates are picked up after dicing.

Feedback sensor type Series IZS41
(High speed static electricity elimination specification)

Rapid elimination of static electricity by a feedback sensor
Note: An ion balance sensor is installed.
The speed of static electricity elimination has been increased by reading the workpiece’s electrostatic potential by the feedback sensor (option) and continuously emitting ions with a reverse polarity.

Eliminating static electricity on an electric substrate

Prevents element disruption due to discharge.
Prevents adhesion of dust.

Eliminating static electricity on a glass substrate

Prevents breakage due to adhesion and discharge.
Prevents adhesion of dust.

Run mode after static electricity elimination (ion balance: within ±30 V) can be selected.

Standard type Series IZS40

Simple operation: Can be controlled by powering the ionizer ON.
Static electricity removal speed is improved with the use of the IZS40.
At 1000 mm, the static electricity removal speed of the IZS40 is 3.2 s. This represents a 41% reduction in removal speed as compared to previously released models.
AC adapter power supply is available.
Suitable for static electricity elimination of resin and rubber pieces (small parts).

Eliminating static electricity on PET bottles

Trip-resistance during conveying
Prevents adhesion of dust.

Eliminating static electricity on molded goods

Improves detachability of molded goods from a die.

Reduction of adjustment and maintenance labor by auto balance sensor

Built-in type (Standard)
High accuracy type (Option)

Low maintenance electrode cartridges are used.

Minimizes contamination of electrode needles by discharging compressed air at the surface of the needles.

2 types of electrode needle materials
Tungsten: Ion balance ±30 v
Single crystal silicon: Ion balance ±30 v, suitable for eliminating static electricity of silicon wafer

High speed static electricity elimination cartridges and energy saving static electricity elimination cartridges are available.

High speed de-ionizing cartridge

Energy saving type de-ionizing cartridge
The flow rate consumption of the energy-saving static electricity elimination cartridge is approximately 50% less than that of the high speed static electricity elimination cartridge.
The static electricity elimination speed is reduced by approximately 20 to 30%.

Setting ionizer with remote controller

Transition wiring may be used.

Safety functions

Eliminating static electricity from films

Prevents adhesion of dust.
Prevents winding failure due to wrinkles etc.

Eliminating static electricity on film molded goods

Prevents attaching to conveyer.
Prevents dispersion of finished goods.

Eliminating static electricity during wafer transfer

Prevents breakage due to discharge between wafers and hands.

Eliminating static electricity from packing films

Prevents the filled substance from adhering to the packing film.
Reduces packing mistakes.

Eliminating static electricity from lens

Removes dust from lens.
Prevents adhesion of dust.

Eliminating static electricity from parts feeder

Prevents clogging of parts feeder.

The post Ionizer Series IZS40/41/42 appeared first on SMC United Arab Emirates.

Ionizer/Nozzle Type IZN10

smcmin — Fri, 10 Jan 2014 03:01:31 +0000

Description

Nozzle type: Dust removal and static electricity elimination by air blow
Spot type static electricity elimination
Slim design: Thickness dimension 16 mm
RoHS compliant
Nozzle type can be selected according to applications.
Energy saving static electricity elimination nozzle (Short range static electricity elimination, design focuses on ion balance)
High flow static electricity elimination nozzle (Long range static electricity elimination and dust removal)

Related Downloads

Product Catalog
2D CAD File
Manual
DoC

Series	Ion generation method	Ion balance
IZN10	Corona discharge type	Energy saving static electricity elimination nozzle：±10V or less High flow static electricity elimination nozzle：±15V or less

The post Ionizer/Nozzle Type IZN10 appeared first on SMC United Arab Emirates.

Ionizer/Fan Type IZF10

smcmin — Fri, 10 Jan 2014 02:02:01 +0000

Description

Compact design: 80 mm x 110 mm x 39 mm
Weight: 280 g
Static electricity elimination time: 1.5 seconds
With alarm function
High-voltage error, electrode needle contamination detector

Related Downloads

Product Catalog
2D CAD File
Manual
DoC

Series	Ion generation method	Ion balance
IZF10	Corona discharge type (DC)	±13V

Features

Compact / Light weight
Compact design: 80 x 110 x 39 mm
Weight: 280 g
Rapid elimination of static electricity
Static electricity elimination time: 1.5 seconds
* Based on ESD-STM3.1-2006 standards
Ion balance*: ±13 V
* Based on ANSI/ESD-STM3.1-2006 standards
With alarm function
High-voltage error, electrode needle contamination detector

The post Ionizer/Fan Type IZF10 appeared first on SMC United Arab Emirates.

Electric Gripper LEH Series

smcmin — Thu, 09 Jan 2014 07:53:47 +0000

Description

Easy setting: Data can be set 2 items, position and force.
The controller is already set with the data of the actuator.
(The actuator and controller are sold as a package.)
Drop prevention function is provided. (Self-lock mechanism is provided for all series.)
Power consumption reduced by self-lock mechanism.
Gripping check function is provided.
Possible to set position, speed and force. (64 points)
Compatible controllers: LECP6，LECP1，LECPA，LECPMJ

Related Downloads

Product Catalog
2D CAD File
3D CAD File
Manual
DoC

Spec.	Model	Body size	Stroke/ both sides (mm)	Gripping force [N] Basic	Gripping force [N] Compact	Opening and closing speed (mm/s)
Step motor (Servo/24 VDC)	LEHZ 2 fingers	10	4	6 to 14	2 to 6	5 to 80
Step motor (Servo/24 VDC)	LEHZ 2 fingers	16	6	6 to 14	3 to 8	5 to 80
Step motor (Servo/24 VDC)	LEHZ 2 fingers	20	10	16 to 40	11 to 28	5 to 100
Step motor (Servo/24 VDC)	LEHZ 2 fingers	25	14	16 to 40	11 to 28	5 to 100
Step motor (Servo/24 VDC)	LEHZ 2 fingers	32	22	52 to 130	―	5 to 120
Step motor (Servo/24 VDC)	LEHZ 2 fingers	40	30	84 to 210	―	5 to 120
Step motor (Servo/24 VDC)	LEHZJ 2 fingers	10	4	6 to 14	3 to 6	5 to 80
Step motor (Servo/24 VDC)	LEHZJ 2 fingers	16	6	6 to 14	4 to 8	5 to 80
Step motor (Servo/24 VDC)	LEHZJ 2 fingers	20	10	16 to 40	11 to 28	5 to 100
Step motor (Servo/24 VDC)	LEHZJ 2 fingers	25	14	16 to 40	11 to 28	5 to 100
Step motor (Servo/24 VDC)	LEHF 2 fingers	10	16（32）Note)	3 to 7	3 to 7	5 to 80
Step motor (Servo/24 VDC)	LEHF 2 fingers	20	24（48）Note)	11 to 28	11 to 28	5 to 100
Step motor (Servo/24 VDC)	LEHF 2 fingers	32	32（64）Note)	48 to 120	48 to 120	5 to 100
Step motor (Servo/24 VDC)	LEHF 2 fingers	40	40（80）Note)	72 to 180	72 to 180	5 to 100
Step motor (Servo/24 VDC)	LEHS 3 fingers	10	4	2.2 to 5.5	1.4 to 3.5	5 to 70
Step motor (Servo/24 VDC)	LEHS 3 fingers	20	6	9 to 22	7 to 17	5 to 80
Step motor (Servo/24 VDC)	LEHS 3 fingers	32	8	36 to 90	―	5 to 100
Step motor (Servo/24 VDC)	LEHS 3 fingers	40	12	52 to 130	―	5 to 120

The post Electric Gripper LEH Series appeared first on SMC United Arab Emirates.

Electric Slide Table/Compact Type LES

smcmin — Thu, 09 Jan 2014 07:24:27 +0000

Description

Compact: Compared with the LESH, Workpiece mounting surface height:
Reduced by up to 12%.
Vertical work load: Increased by up to 50%
Lightweight: Reduced by up to 29%
Max. pushing force: 180 N
Positioning repeatability: ±0.05 mm
Possible to reduce cycle time
Max. acceleration/deceleration: 5,000 mm/S2
Max. speed: 400 mm/s
Compatible controllers: LECP6, LECA6, LECP1, LECPA, LECPMJ

Related Downloads

Product Catalog
2D CAD File
3D CAD File
Manual
DoC

Spec.	Model	Stroke (mm)	Work load (kg) Horizontal	Work load (kg) Vertical	Speed (mm/s)	Screw lead (mm)
Step motor (Servo/24 VDC)	LES8□	30，50，75	MAX.1	MAX.0.5	MAX.400	4 ，8
Step motor (Servo/24 VDC)	LES16□	30，50，75，100	MAX.3	MAX.3	MAX.400	5，10
Step motor (Servo/24 VDC)	LES25□	30，50，75，100，125，150	MAX.5	MAX.5	MAX.400	8、16
Servo motor (24 VDC)	LES8□A	30，50，75	MAX.1	MAX.1	MAX.400	4，8
Servo motor (24 VDC)	LES16□A	30，50，75，100	MAX.3	MAX.3	MAX.400	5，10
Servo motor (24 VDC)	LES25□A	30，50，75，100，125，150	MAX.5	MAX.4	MAX.400	8，16

The post Electric Slide Table/Compact Type LES appeared first on SMC United Arab Emirates.

Electric Rotary Table LER

smcmin — Thu, 09 Jan 2014 07:17:31 +0000

Description

Rotation angle : 320º (310º), 180º, 90º
(　) The value indicated in brackets shows the value for the LER10.
Low profile: Height 42 mm (LER10)
Space-saving : Built-in step motor
Shock-less/high speed actuation
Max. speed: 420º/sec (7.33 rad/sec)
Max. acceleration/deceleration : 3,000º/sec2 (52.36 rad/sec2)
Possible to set speed, acceleration/deceleration, and position.
Max. 64 points
Energy-saving : Automatic 40% power reduction after the table has stopped.
Easy setting : Data can be set with only 2 items, position and speed.
The controller is already set with the data of the actuator. (The actuator and
controller are provided as a set.)
Compatible controllers: LECP6, LECP1, LECPA, LECPMJ

* Value when an external stopper is mounted.

Related Downloads

Product Catalog
2D CAD File
3D CAD File
Manual
DoC

Model	Rotating torque [N·m] Basic	Rotating torque [N·m] High torque	Max. speed [º/s] Basic	Max. speed [º/s] High torque	Positioning repeatability [º] Basic	Positioning repeatability [º] High torque
LER10	0.2	0.3	420	280	±0.05 (End: ±0.01)＊	±0.05 (End: ±0.01)＊
LER30	0.8	1.2	420	280	±0.05 (End: ±0.01)＊	±0.05 (End: ±0.01)＊
LER50	6.6	10	420	280	±0.05 (End: ±0.01)＊	±0.05 (End: ±0.01)＊

The post Electric Rotary Table LER appeared first on SMC United Arab Emirates.

Electric Actuator/Guide Rod Type LEYG

smcmin — Thu, 09 Jan 2014 07:06:51 +0000

Series LEYG Step Motor (Servo/24 VDC) Servo Motor (24 VDC)

Compact integration of guide rods
Achieves lateral load resistance and high non-rotating accuracy.
Lateral end load: 5 times more (compared with rod type, size 25 and 100 stroke)
Compatible with sliding bearing and ball bushing bearing.
Compatible with moment load and stopper (sliding bearing).
Speed control/Positioning: Max. 64 points
Positioning and pushing control can be selected.
Possible to hold the actuator when pushing the rod to a workpiece, etc.
Positioning repeatability: ±0.02 mm or less
Compatible controllers: LECP6，LECA6，LECP1，LECPA，LECPMJ

Series LEY AC Servo Motor

High output motor (100/200 W)
Improved high speed transfer ability
High acceleration/deceleration compatible （5,000mm/S²）
Pulse input type
With internal absolute encoder
Compatible drivers: LECSA，LECSB，LECSC，LECSS
Motorless specification available Click here for details

Related Downloads

Product Catalog
2D CAD File
3D CAD File
Manual
DoC

Spec.	Model	Stroke (mm)	Pushing force [N]/ Vertical work load (kg)	Speed (mm/s)	Screw lead (mm)
Step motor (Servo/24 VDC)	LEYG16	30 to 200	MAX.141	MAX.500	2.5，5，10
Step motor (Servo/24 VDC)	LEYG25	30 to 300	MAX.452	MAX.500	3，6，12
Step motor (Servo/24 VDC)	LEYG32	30 to 300	MAX.707	MAX.500	4，8，16
Step motor (Servo/24 VDC)	LEYG40	30 to 300	MAX.1058	MAX.300	4，8，16
Servo moto (24 VDC)	LEYG16A	30 to 200	MAX.111	MAX.500	2.5，5，10
Servo moto (24 VDC)	LEYG25A	30 to 300	MAX.130	MAX.500	3，6，12
AC servo motor	LEYG25S	30 to 300	MAX.485	MAX.900	3，6，12
AC servo motor	LEYG32S	30 to 300	MAX.588	MAX.1200	5，10，20

The post Electric Actuator/Guide Rod Type LEYG appeared first on SMC United Arab Emirates.

Electric Actuator / Rod Type LEY

smcmin — Thu, 09 Jan 2014 07:00:08 +0000

Series LEY Step Motor (Servo/24 VDC) Servo Motor (24 VDC)

Long stroke: Max. 500 mm
Direct mounting: 3 directions, Bracket mounting: 3 types
Auto switch can be mounted.
Speed control/Positioning: Max. 64 points
Either positioning or pushing control can be selected.
Possible to hold the actuator with the rod pushing to a workpiece, etc.
Positioning repeatability: ±0.02 mm or less
Dust/Drip proof (IP65) specification
Compatible controllers: LECP6，LECA6，LECP1，LECPA，LECPMJ

Series LEY Step Motor (Servo/24 VDC) Servo Motor (24 VDC)

High output motor (100/200/400 W)
Improved high speed transfer ability
High acceleration compatible (5,000 mm/S2)
Pulse input type
With internal absolute encoder
Positioning repeatability: ±0.02 mm or less
Dust/Drip proof (IP65) specification
Compatible drivers: LECSA，LECSB，LECSC，LECSS
Motorless specification available Click here for details

Related Downloads

Product Catalog
2D CAD File
3D CAD File
Manual
DoC

Spec.	Model	Stroke (mm)	Pushing force (N)	Speed (mm/s)	Screw lead (mm)
Step motor (Servo/24 VDC)	LEY16□	30 to 300	MAX.141	MAX.500	2.5，5，10
Step motor (Servo/24 VDC)	LEY25□	30 to 400	MAX.452	MAX.500	3，6，12
Step motor (Servo/24 VDC)	LEY32□	30 to 500	MAX.707	MAX.500	4，8，16
Step motor (Servo/24 VDC)	LEY40□	30 to 500	MAX.1058	MAX.300	4，8，16
Servo motor (24 VDC)	LEY16□A	50 to 300	MAX.111	MAX.500	2.5，5，10
Servo motor (24 VDC)	LEY25□A	50 to 400	MAX.130	MAX.500	3，6，12
AC servo motor	LEY25□S	30 to 400	MAX.485	MAX.900	3，6，12
AC servo motor	LEY32□S	30 to 500	MAX.588	MAX.1200	5，10，20
AC servo motor	LEY63□S	100 to 800	MAX.1910	MAX.1000	5，10，20

The post Electric Actuator / Rod Type LEY appeared first on SMC United Arab Emirates.

Electric Actuator/Guide Rod Slider Series LEL

smcmin — Thu, 09 Jan 2014 06:44:26 +0000

FeaturesApplication ExamplesSystem ConstructionSeries Variations

Low-profile/Flat Height 48 mm
Profile reduced by side ounting of motor
Max. stroke: 1000 mm
Transfer speed: 1000 mm/s

Simple construction. Guide type can be selected.

Auto switch mountable (Made to Order)

For checking the limit and intermediate signal.
Applicable to the D-M9l and D-M9lW (2-color indication)

Offering 2 types of controller

Electric Actuator / Guide Rod Slider Series LEL

Controller LEC

The post Electric Actuator/Guide Rod Slider Series LEL appeared first on SMC United Arab Emirates.

Electric Actuator High Rigidity Slider Type Series LEJ

smcmin — Thu, 09 Jan 2014 06:16:24 +0000

FeaturesApplication ExamplesSeries VariationsAC Servo Motor Driver

Ball Screw Drive, Belt Drive [AC Servo Motor (100/200 W)]

Ball Screw Drive Series LEJS / Size: 40, 63
Max. work load: 85 kg
Positioning repeatability: ±0.02 mm
Max. acceleration/deceleration: 20000 mm/s2

Belt Drive Series LEJB / Size: 40, 63
Max. stroke: 3000 mm
Max. speed: 3000 mm/s
Max. acceleration/deceleration: 20000 mm/s2

Compatible Drivers

Low-profile/Low center of gravity

Height dimension reduced by approx. 31% (Reduced by 28 mm)

Workpiece does not interfere with the motor

Weight reduction

High precision/High rigidity

Double axis linear guide reduces deflection

Reduction of the installation labor

Possible to mount the main body without removing the external cover, etc.

Solid state auto switch can be mounted

Switch wiring can be placed in the body
D-M9 W (2-color indication), D-M9

The post Electric Actuator High Rigidity Slider Type Series LEJ appeared first on SMC United Arab Emirates.

Strategic Products – SMC United Arab Emirates

Ionizer Series IZS40/41/42

Dual AC type Series IZS42 (Potential amplitude reduction specification)

Feedback sensor type Series IZS41 (High speed static electricity elimination specification)

Standard type Series IZS40

Reduction of adjustment and maintenance labor by auto balance sensor

Low maintenance electrode cartridges are used.

Ionizer/Nozzle Type IZN10

Description

Ionizer/Fan Type IZF10

Description

Features

Electric Gripper LEH Series

Description

Electric Slide Table/Compact Type LES

Description

Electric Rotary Table LER

Description

Electric Actuator/Guide Rod Type LEYG

Series LEYG Step Motor (Servo/24 VDC) Servo Motor (24 VDC)

Series LEY AC Servo Motor

Electric Actuator / Rod Type LEY

Series LEY Step Motor (Servo/24 VDC) Servo Motor (24 VDC)

Series LEY Step Motor (Servo/24 VDC) Servo Motor (24 VDC)

Electric Actuator/Guide Rod Slider Series LEL

Simple construction. Guide type can be selected.

Auto switch mountable (Made to Order)

Offering 2 types of controller

Electric Actuator High Rigidity Slider Type Series LEJ

Ball Screw Drive, Belt Drive [AC Servo Motor (100/200 W)]

Low-profile/Low center of gravity

High precision/High rigidity

Reduction of the installation labor

Solid state auto switch can be mounted

Feedback sensor type Series IZS41
(High speed static electricity elimination specification)